PDA

View Full Version : Cheetah 1 Chassis



jimmiejump
03-02-2006, 05:04 AM
Does anyone have a picture of the front of this chassis they can share? I'm trying to figure out how to attach the top pan to the chassis. Thanks in advance

Ramcatlarry
03-03-2006, 01:58 AM
The guide tongue slides thru the slot in the pan. You NEED the .070" thick guide spacer (or similar) to keep the pan from jamming on the guide flag nut. Most of the later ones also have a hole to use a motor screw to locate the pan, too.