let's Build One!

[WireEDM-guy]

This is a new feature where I will be building chassis's with all of Precision Slot Cars Chassis Fixtures.
To show what kind of results and how easy it is to build a chassis when you build with Precision Slot Cars Chassis fixtures.
Now anyone can build a chassis with precision results. Build to win!
Your comments are always welcome.Watch for the new builds.
Dave :cool:

[WireEDM-guy]

I just built this chassis on the first prototype WRP Pro Inline chassis fixture.
Here are some pictures of how I built a wide chassis C-02. Along the way I do Some inspection of the quality you can expect when you build with Precision Slot Cars chassis fixtures. I built this chassis like any newbie would build there first car. Here are the results.

18151

[WireEDM-guy]

Checking squareness,this is the results you can expect when you build
with Precision Slot Cars build fixtures!
17849
Nothing special was done in preparation for this build the kit was lightly deburred.
17850
17851
17852
The rear frame rails cut and soldered in place wheelie bar set at 4.950"
from the rear axle
17853
With the frame built solder the axle bushings in next,Check to make sure the
set up wheels are sitting flat.
If they rock this is when you need to file the pillow blocks out just enough to have the set up wheels sit flat.
17852
The axle bushings soldered in place
17854
Setting up the front axle bracket
Demo80-photos/PRODUCTS/DSC00511.jpg
Solder the axle to the bracket
Demo80-photos/PRODUCTS/DSC00547.jpg
Finished Chassis I hope everyone finds this informative and that it answers
some of the many question I receive

[WireEDM-guy]

Getting ready for a new entry in the let's build one feature. Which chassis do you want to see built?
The chassis with the most votes will be the next entry in the let's build one section.

Dave

[S_hagan77]

Top fuel dragster chassis.

[Dave@PSC]

No need to scroll here's a flash video.


https://www.youtube.com/watch?v=bN7WKZ-w2N0