PDA

View Full Version : Quad Magnets



Jesse
02-03-2003, 04:57 PM
Hey Paul,

What do you think is the best way to put quad magnets into a g20 with out buying a hone or messing them up.

Thanks!

Paul Ciccarello
02-12-2003, 06:48 AM
It depends if the magnets are the same size as stock mura magnets. If they are, you can just use the magnet clips and superglue the magnets in. If not you will need a slug the same size as the air gap will be. Use JB weld to glue them in. Put the JB weld on the magnets and put them in the can. Then put the slug in and wipe out the excess glue. Last position them where you want them, let the glue dry and you are ready to go. There is a chance no matter what that you will need a hone. I do not know the size of the magnets so I cannot tell you that.

Paul