Paul you can move this if you want.
I got an email today about Photobucket from their new management.
Thank goodness after many people complained about their ransoming 3rd party hosting they are...
.
.
Type: Posts; User: Slapshot
Paul you can move this if you want.
I got an email today about Photobucket from their new management.
Thank goodness after many people complained about their ransoming 3rd party hosting they are...
Cool beans Photobucket ransomware unlocked my pictures after I reminded them I already had a previous paid account with them that had not expired.
They gave me a free year until I have to...
All or not of these methods may work.
Not knowing motor size or the diameter of the shaft there a few ways you can approach. One easy way would be center bore the shaft with an slight over sized...
It sounds as if Craig you may be right. So the legend will continue in the mystery.I recall portions of Paul's Black track had a bottom to it like the old Hassie king track at Kent.
Speaking of "Bigfoot" that reminds me RIP Chuck Ballenger old friend....
Ps The Famous lost Black track stories are like Bigfoot sightings in Wetsville Seattle.
Paul K: Something lost something found is this your old Black Track
I was rifling thru my FB and Shawn Sweeny posted something about a track for sale on C/List. Lo and behold I looked at the pictures and the panel and two small shallow banked sections looked super...
Thier system for multi relays involves one relay shutting all off.... simlar to what a lot of people had done with the SRT in a modification to decrease the load on the main board.
On the multi...
This is just a quick down and dirty cut an paste description....
I don't have my wireing diagram for srt but go to both their web sites and FYI sections:
TRACKMATE:...
I agree with Larry about the 1/4" stripe (or wider) being the best visablitiy. Larry's much wiser than me......
Go with the double line striper version, you can do a simple adjust the seperator...
OK found the thread (better late than never): I forgot I did a brief tutorial ofn paint striping there also......
If you do a search on Matstercraft or Masters paint striper you should be able to find a paint striping tool. Also might be listed as Marshalltown Striper. That the cheapest around.
Try your local...
Most all of the faster flat tracks do have some sort of 2-8 deg "cupping" banking in them near or at end of straight or various areas to alleviate or minimalize reverse camber situations. It just...
Durhams is good stuff use it all the time....far easier to work with than bondo with minimal shinkage.
Yes they all will work.
RB
http://www.slotcartalk.com/slotcartalk/attachment.php?attachmentid=5457&d=1242294482
http://www.cybergecko.com/rc500.jpg
Picture not represetation of real event by TH
Images in mirror may apper...
For what you will be needing them for and total number the cheaper relays will suffice. Do get something rated at 40 Amps and 12-14V. There ar 60-80 amp automotive relays if you want to pay for them....
Dang....Everybody's covered what I would have suggested so I keep quiet and let the conversation progress.....
Ahh Rustoleum Silver Grey kinda North West Seattle wet asphalt (fried in summer)...
As to shortening it 8ft more to fit in a 40X40 area a bit of work: the only other option would be to remove the current donut and a 8ft end of straight section and "vulcan mind meld" the leadon to...
I am kind of partial to the forum name:
Phinius & Ferb Flactuous Airhead Special Paint Box Symposium
http://ts4.mm.bing.net/th?id=H.4779762892344659&pid=1.7&w=322&h=175&c=7&rs=1
RB
...
I have never tried it and don't know how well it works but Ultimate Racer has a plastic track design software "Track Editor" along with thier timing system. You will have to download plus the track...
SCR:
Your just begging for a baggage tear down and inspection with the airport security "inspected" tape pre applied. I would add a caustic or poision label to be sure they do. Homeyland...
http://farm9.staticflickr.com/8527/8616087257_de183e3512_o.jpg
Yes it looks as if Kevin has worn off or is missing his left thumb. Hes now a collectable.
Raymond
Nice catch GuGu shows how a simple post can lead to correction of a unkowen manufacturing problem.
I am sure George will talk to the current USRA Scale Director about the body and make a decision...
Happy Recycled Birthday
Raymond
Gary they are the same just retooled from the old CAD program. The 1/32 was the first recut indication as it is from an eairlier design with the front modified stronger. I think the only difference...