I use to have a difalco but sold it a few years ago to buy a truspeed controller as a backup to my third eye.
Type: Posts; User: quakebo
I use to have a difalco but sold it a few years ago to buy a truspeed controller as a backup to my third eye.
I did email Howard and this is his reply. That's just the way it is, the sense goes very low and has plenty7 or margin
and is usable. Nothing can be done, this is out of production for many years.
I have a third eye Predator 2 - 3000MP which works fine but if I set the sensitivity to minimum and start to pull the trigger nothing happens. So what I do is pull the trigger till it's just making...
All fix now it was a transistor had blown.
Thanks for the reply's will do the meter check and see if can find something wrong. also this problem just started happening. We checked the track and found a short on it so think it has done...
I have a third eye predator 2 - 3000mp Gawronski edition controller.
Now the problem is I do not have to touch the controller when it is plugged in and when I put a car on the track on it will just...
Well I am find that when you try driving a car it is like the car is not always getting power. So it is jerky and therefore not drivable no matter where you put all the pots and switches.:-(
I sent him one a few days ago but have not had a reply yet.
Looked at the controller again and found a wire shorting and the wiper button need fixing. Still have same problem but if I switch the hi/low switch to the high position and put the sensitivity pot...
Well we have looked at it and think the trigger bearing might be worn and need replacing. So what size is the bearing or will a parma one fit?
I tried my controller last night and still same problem it is like the car struggle's to get power at low speed. I have tried my cars with other controller's and no problem so mine has a problem.
I do not want to send it to Howard as I live in the uk and postage will be a lot there and back.
Yes it does have the HI/LOW switch and no it has not got moved it is still on low. Also I have tried moving all switches and pots to different positions and still get the same problem. That's why I...
I have tried this and that worked but it used to work with the sensitivity knob on lowest position and now it doesn't so I am thinking the pot might be faulty.
Ok I will try this and report back.
I have a third eye predator 2 - 3000mp Gawronski edition controller.
Now this is what it is doing I set the sensitivity knob to low and car will not move until wiper arm is almost halfway along. ...
I have made a dead strip section for my tomy afx using an uno board. the dead bit is 120mm long and the removed bits are 35mm long. now if I drive all cars slow it works great but if I drive them...
ok thanks for the info guys I will try all the different gear ratios and see what works best.
he is using a carsteen and i am using a Third Eye Predator 2 Controller model # 3000MP "Gawronski Edition. he is quicker than me every where. we can do anything to the motor we like as long as we...
One of the classes we run is 1/24 sports using a champion turbo flex chassis with sealed death star motor. we run these on fulll power Regulated 14.2 volts, 75 amps. my car will do 5.0 second lap...
the cars are in front of the counter
the software we use is slot master
my problem or other peoples problem with my controller is when we race finals we have live start so if you press the trigger before the lights go out the computer detects this and you get a penalty....
that's a good idea but I would like it so I could select the track I will be racing on then select the lane then select the car and the controller sets itself up.
by quick I mean I want a quick time
tires will probably be between 16.5 and 17.5 depends what I have already maid
do not no the weight of the chassis
do not know anything about the track as it is...