.

.

Results 1 to 8 of 8

Thread: WRP C Series Chassis fixture

  1. #1
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    116

    WRP C Series Chassis fixture

    WRP C-series build fixture works for all WRP stamped steel chassis kits C-06,C-07,C-08,C-10.
    Use this fixture to build awesome drag chassis's. Hold all parts in the kit square and straight.
    Build like the pros. All pro racers use fixtures and this fixture is the best! Adjustable guide bracket,
    12 possible wheel bases. Sets front and rear axles perpendicular to guide flag.
    Wheelie bar length set at 4.950
    Wire bending fixture designed to bend .063 wire included for making braces.
    This chassis fixture is the fastest, easiest way to build drag chassis's that will launch straight and compete.
    Revised design to build your chassis with .062 wire .072 stainless tube .078 wire or .082 stainless tube.
    A complete picture guide of basic operation of the fixture will be e-mailed with all purchases.
    Complete kit includes:
    1) set of set-up wheel blocks
    8) hardened stainless steel dowel pins fore axles,
    20) stainless steel dowel pins for motor box and frame rails,
    1)bolt,washer,nut.
    1) bend key,
    1)3/32 ultra precision build axle 3 5/16 long.

    Thanks for choosing Precision Slot Cars.
    89.95 plus shipping






    Attached Images Attached Images
    Last edited by Dave@PSC; 10-20-2016 at 06:46 PM.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  2. #2
    Join Date
    Mar 2004
    Posts
    358

    Thumbs up Sweeeeet!!!

    WOW!! Very nice chassis building jigs! Problem is I want them all!

  3. #3
    Join Date
    Feb 2009
    Posts
    12
    I totally agree. These things are the best thing since sliced bread. All my cars have gotten faster since I started building on these fixtures with the same combos. I have all of his fixtures and am looking forward to what's coming out next. Keep up the good work and keep these great products coming.

  4. #4
    Join Date
    May 2009
    Location
    Near Auburn, WA
    Posts
    135

    Thumbs up GREAT PRODUCT, even better customer service !!

    Hi Fellow Slot Racers,

    I own Pacific Slot Car Raceways in Edgewood, WA. We have been open for 3 months now. Since we opened the doors we have had a loyal drag racer following from the previous South Hill Slots. We have sold many of Dave's fine products over the last few weeks. I am very impressed with the quality of their products and the nice customer service provided by Dave and his better half, Julie. We have sold quite afew of their products and are again sold out of this AWESOME jig for drag chassis. I just placed another order and they wil be gone in a week like those orders before this one.

    CHECK OUT THESE PRODUCTS !!

    Your cars will be more square and done correctly. Just have a good iron and lower ET's are just ahead.

    Happy Holidays

    Rob McCuistion
    Pacific Slot Car raceways
    2908 Meridian Ave E #104
    Edgewood, WA 98371
    253=632-5058

  5. #5
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    116
    The best selling Drag chassis fixture.
    CAD designed so all the parts line up with precision.
    Not a generic jig that might line up the parts of your chassis kit!
    Compare our Quality to any jig on the market you'll
    know why Precision Slot Cars chassis fixtures are the best!!!
    Last edited by WireEDM-guy; 03-02-2010 at 09:39 AM.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  6. #6
    Join Date
    Feb 2007
    Location
    Farmington Hills,MI
    Posts
    138
    Dave,
    When are you going to come up with a motor soldering jig for wing cars? I have modified my Carlisle corian block to fit the predominant "Beuf Express Ultra" and am thinking about adding pin holes to keep the chassis steady while soldering in a new motor between heats. The magnets don't keep it firm enough. I would also like it in white so I can see what I am doing. I also struggle with pin tube soldering in the exact same location on each chassis so all my bodies fit on each chassis. Come check out the "wing car world" aka "speed crazed morons" at Skidmarks sometime.

    Tim Zimmerman
    Tim Zimmerman, former slotcar racer

  7. #7
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    116
    Tim,
    Hang in there It's coming soon!!! Along with a few other overdue Precision chassis fixture's
    for all kind of building.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  8. #8
    Join Date
    Oct 2016
    Posts
    1
    I know this is an old post but I got this fixture this week and was able to build a couple really nice chassis with the WRP stainless In Line kits. This fixture cuts build time and improves the quality of the build. It is well worth the investment if you build your own. Rock on Precision Slot Cars!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •