.

.

Results 1 to 7 of 7

Thread: controller problem

  1. #1
    Join Date
    Nov 2002
    Location
    england
    Posts
    198

    Angry controller problem

    on my 30 band difalco controller every thing is all wired up correctly the
    transistor,diode and 10ohm resistor all measure fine on the meter.

    and when you put the meter on it and move the wiper arm across the wiper
    board the digits on the meter change with each band you put the wiper
    arm on so that is fine.

    I compared it to another 30 band difalco and everything is the same
    between the two controllers except mine only works on the last 3 bands.

    I have also emailed Jim at difalco
    this is my Signature

  2. #2
    Join Date
    Nov 2003
    Posts
    1,304
    Difalco has a great troubleshooting page on his website. You might want to take a look.
    http://www.difalcoonline.com/
    Last edited by shontelh; 07-11-2009 at 08:32 AM.

  3. #3
    Join Date
    Nov 2002
    Location
    england
    Posts
    198
    my transistor is fine
    this is my Signature

  4. #4
    Join Date
    Jun 2002
    Location
    Land of Excitement "Bensenville"
    Posts
    1,326
    OHM each one of the little blue pots make sure none of those are bad.
    Michael Mazur
    Ruzam Racing
    Team ProSlot

  5. #5
    Join Date
    Nov 2002
    Location
    england
    Posts
    198
    on a 30 band difalco you do not have little blue pots. and my controller is now fixed
    this is my Signature

  6. #6
    Join Date
    Jun 2002
    Location
    Jacksonville, Florida
    Posts
    1,179
    curious minds want to know what the problem was.
    Rollin Isbell

  7. #7
    Join Date
    Nov 2002
    Location
    england
    Posts
    198
    it turns out I hand the fuse holder wire on the wrong pin of the transistor
    this is my Signature

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •