.

.

Results 1 to 5 of 5

Thread: let's Build One!

  1. #1
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    113

    let's Build One!

    This is a new feature where I will be building chassis's with all of Precision Slot Cars Chassis Fixtures.
    To show what kind of results and how easy it is to build a chassis when you build with Precision Slot Cars Chassis fixtures.
    Now anyone can build a chassis with precision results. Build to win!
    Your comments are always welcome.Watch for the new builds.
    Dave
    Last edited by WireEDM-guy; 08-21-2009 at 02:20 PM.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  2. #2
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    113

    WRP Pro inline C-02 build

    I just built this chassis on the first prototype WRP Pro Inline chassis fixture.
    Here are some pictures of how I built a wide chassis C-02. Along the way I do Some inspection of the quality you can expect when you build with Precision Slot Cars chassis fixtures. I built this chassis like any newbie would build there first car. Here are the results.

    Build the motor box first

    Setting up the motor block.Have the screws just loose enough to move the parts,set the block on the base
    and align the parts with the slot and cut outs. Tighten screws only enough to hold parts from moving

    Soldering the motor box together


    Check the squareness of the motor box

    Setting the motor box in position with axle bushing in place and build axle installed.The motor box needs to be in position before soldering the main rails.

    Front half cut and soldered together

    Soldering the axle bushings in place

    Checking how straight the axle was installed That's .0023 from side to side a little work with the diamond
    file on the pillow block and the axle set perfect.NOTE: Always check that the set up wheels are sitting flat and not rocking.


    Installing the front axle
    I put the one's I thought were the most informative in this thread.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  3. #3
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    113

    #2 WRP Pro Inline C-02

    Checking squareness,this is the results you can expect when you build
    with Precision Slot Cars build fixtures!
    Click image for larger version. 

Name:	DSC00509.jpg 
Views:	17 
Size:	23.2 KB 
ID:	17849
    Nothing special was done in preparation for this build the kit was lightly deburred.
    Click image for larger version. 

Name:	DSC00545.jpg 
Views:	20 
Size:	30.9 KB 
ID:	17850
    Click image for larger version. 

Name:	DSC00546.jpg 
Views:	17 
Size:	32.6 KB 
ID:	17851
    Click image for larger version. 

Name:	DSC00535.jpg 
Views:	20 
Size:	29.5 KB 
ID:	17852
    The rear frame rails cut and soldered in place wheelie bar set at 4.950"
    from the rear axle
    Click image for larger version. 

Name:	DSC00517.jpg 
Views:	18 
Size:	23.0 KB 
ID:	17853
    With the frame built solder the axle bushings in next,Check to make sure the
    set up wheels are sitting flat.
    If they rock this is when you need to file the pillow blocks out just enough to have the set up wheels sit flat.
    Click image for larger version. 

Name:	DSC00535.jpg 
Views:	20 
Size:	29.5 KB 
ID:	17852
    The axle bushings soldered in place
    Click image for larger version. 

Name:	DSC00510.jpg 
Views:	15 
Size:	12.7 KB 
ID:	17854
    Setting up the front axle bracket
    [IMG]Demo80-photos/PRODUCTS/DSC00511.jpg[/IMG]
    Solder the axle to the bracket
    [IMG]Demo80-photos/PRODUCTS/DSC00547.jpg[/IMG]
    Finished Chassis I hope everyone finds this informative and that it answers
    some of the many question I receive
    Last edited by Dave@PSC; 02-13-2018 at 07:15 AM.
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  4. #4
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    113
    Getting ready for a new entry in the let's build one feature. Which chassis do you want to see built?
    The chassis with the most votes will be the next entry in the let's build one section.

    Dave
    Build to Win!! Precision Slot Cars chassis fxtures make racers go faster and win more!
    All designs,products and trademarks are the sole property of Precision Slot Cars! Copyright 2009
    http://www.pslotcar.com

  5. #5
    Join Date
    Dec 2013
    Posts
    1
    Top fuel dragster chassis.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •