.

.

Results 1 to 9 of 9

Thread: NEW scratch builder

  1. #1
    Join Date
    Mar 2010
    Location
    Warren, Michigan
    Posts
    81

    NEW scratch builder

    New for summer 2010 Precision Slot Cars Scratch builder chassis fixture.
    After months of development and testing the new scratch builder chassis fixture is ready for racers
    to use.
    We have fit every kind of popular motor bracket on this fixture,WRP ,JK, REHO, and the super
    forged motor bracket from Professor Motor.
    Rear axle is adjustable + or - 1/16" for easy placement of F-1 style chassis's or custom wheel
    bases.
    Front axles can be built with either 3/32" or 1/16" diameter axles spaced 1/4" apart.
    Fixture does 1/16" frame rails and .078" frame rails, all spaced at 1/32" intervals.
    Handy 1/4-20 tapped hole in center of fixture for holding things in place.
    3/32" holes drilled in front and back of fixture to hold axles, set-up wheels and gears.
    Keeping with all Precision Slot Car chassis fixture's sizes and placements are engraved on
    the fixture surface. This is one of the largst fixture's we have made.
    Measures 4" x 8 1/2" x 1/2" thick solid surface material.





    Last edited by Dave@PSC; 09-25-2011 at 10:47 AM.
    http://pslotcar.com Built to Win!
    All designs,products and trademarks are the sole property of Precision Slot Cars™
    All rights reserved © Copyright 2007- 2019

  2. #2
    Join Date
    Dec 2002
    Posts
    40
    Dave,
    NICE WORK! Another great product from the guys and gals at Precision Slot Car Products.I'll be ordering mine in the next couple days.In the second to last picture.There's a pic of a wire bender.Will u also,be releasing one of them in the future.How are you doing with the adapters for the fantom dyno ?

  3. #3
    Join Date
    Jun 2010
    Location
    Michigan
    Posts
    24
    Dave,

    Last night I used my prototype Scratch Builder Jig to build a new JK C-21 for the Retro Flexi race at M&T this Saturday. I think this jig will work for almost anything. I can't wait to get my hands on the production model. If I get my butt back to the work shop I should have an extra Retro Flexi car if you want to use it Saturday. Keep up the good work, your products are the best.

    Seeee ya! at the races.

    Regards,
    Greg VanPeenen
    MRRA

    P.S. Now we have to get to work on one for Retro Pro/Retro anglewinder.

  4. #4
    Join Date
    Mar 2010
    Location
    Warren, Michigan
    Posts
    81

    Revised Scratch Builder

    Here is the first look at the revised Scratch Builder.
    I got some ideas from some of the top builders and have revised the fixture.
    I also have added some new exclusive attachments, Available as an option.
    for the pin tubes and bite bar. Check out the clamping bridge, Available as an option.
    I think all scratch builders will like this feature you can customize
    the bridge to any configuration of tension arms or hold down screws you want.
    I made this one for the pans or the front piece.
    The axle posts have been spread to 3.125" and the jig wheels are tire size and width.

    There is a $15.00 charge for machining the t-slots in the sides.

    Accessories that can be purchased separately are the pin tube feature $24.95, or the Clamping bridge $19.95












    Last edited by Dave@PSC; 09-25-2011 at 10:45 AM.
    http://pslotcar.com Built to Win!
    All designs,products and trademarks are the sole property of Precision Slot Cars™
    All rights reserved © Copyright 2007- 2019

  5. #5
    Join Date
    Dec 2005
    Location
    GROSSE POINTE MI.
    Posts
    86
    I got my first look at the new scratch builder on Friday and with the new overhead clamping system and you should be able to make just about anything! If you wanted a short wheelbase car you could use the overhead clamp to hold a shorter wheelbase in any position you would like... i.e. you could butt the build axel up to the back side of the 4 inch and hold it in place with the clamping system. And now you can do your pin tubes the same way every time (so a body change is as simple as taking one off and putting a different one on) I LOVE this feature. Dave keeps making fixtures better and better, the new jig wheels are very cool and the super thick block is just about bullit proof.
    [SIGPIC][/SIGPIC]RICH
    THE GROOVE RACEWAY (check out my home page) and PSC race team
    PRECISION SLOT CARS CHASSIS FIXTURES, BUILD THEM TO WIN!

  6. #6
    Join Date
    Mar 2010
    Location
    Warren, Michigan
    Posts
    81
    The Scratch builder fixture made with 1 3/16" material retails for $129.95 for the complete package. (jig wheels,build axles and hardware)

    There is a $15.00 charge for machining the t-slots in the sides.

    Accessories that can be purchased separately are the pin tube feature $24.95, or the Clamping bridge $19.95

    No instructions or tutorials needed all the instructions you will need a permanently engraved on the surface of all
    Precision Slot Car chassis fixtures.

    I will post pictures of the final fixture later today
    Last edited by Dave@PSC; 09-25-2011 at 10:41 AM.
    http://pslotcar.com Built to Win!
    All designs,products and trademarks are the sole property of Precision Slot Cars™
    All rights reserved © Copyright 2007- 2019

  7. #7
    Join Date
    Jun 2002
    Location
    Fall City, WA
    Posts
    1,364
    Dave, I love the new thick jig. It works great! Now I just have to upgrade it with the T-Slots on the side... I really like that feature!
    Gary Johnson

  8. #8
    Join Date
    Mar 2010
    Location
    Warren, Michigan
    Posts
    81
    Quote Originally Posted by GearBear View Post
    Dave, I love the new thick jig. It works great! Now I just have to upgrade it with the T-Slots on the side... I really like that feature!
    Let me know when you have about a week with shipping back and forth.
    586 662 1149
    http://pslotcar.com Built to Win!
    All designs,products and trademarks are the sole property of Precision Slot Cars™
    All rights reserved © Copyright 2007- 2019

  9. #9
    Join Date
    Mar 2010
    Location
    Warren, Michigan
    Posts
    81

    2012 Scratch builder available

    This is the production version of the 2012 Scratch Builder.

    I will offer the fixture in both short wheel base and standard wheel base.

    The short wheel base version is for angle winders and any chassis you want to build with short wheel bases.

    The standard version is for all retro chassis's and Formula 1 you can build + or - 1/16"

    This is a precision chassis fixture, you can see in the pictures that all chassis pieces are pinned in place.
    Chassis width and rear axle width are all set with precision. No measuring, no muss, no fuss.
    The fixture assures that your chassis is absolutely straight, square, perpendicular, and centered to tolerances of + or minus .001.
    This is the major difference between a jig and a precision fixture.
    Jig wheels for all retro classes front and rear. all machined with proper clearance.
    Front axle post for 1/16" axles for the angle winders
    Engraved lines for guide length
    Made with 3/4 " solid material

    This is only available through Precision Slot Cars.

    Click image for larger version. 

Name:	DSC02631.jpg 
Views:	30 
Size:	92.2 KB 
ID:	17772
    Last edited by Dave@PSC; 11-15-2017 at 06:59 PM.
    http://pslotcar.com Built to Win!
    All designs,products and trademarks are the sole property of Precision Slot Cars™
    All rights reserved © Copyright 2007- 2019

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •