Slot Car Racer Today

[Mic Byrd]

started building some chassis and motors for the Isra Championship in September. 2 Dog 3's and a jrl built for some local racers the HNR is built with ball bearing fronts in hope it will be a little smother through the turns ran against an HNR with those front and it seemed to me the only place it was better then mine was in the turns. the dogs are standard build with minimal steer. doing a speeder also with a full size center spine to try and take a little bite out of it. here are some pictures
PS Where oh Where Has SCR been

[Mic Byrd]

Built this speeder for myself built it somewhat different then the last 4 or 5 I've built . I did a full spine .032 took all the steer out of it but didn't lock them up and i used the larger set of pan ties give the pans a little more movement. will test it Thursday night at the club

[Rcg Racing]

Is that lead wire the stuff Casey Scott is selling? I heard its pretty good..

[Mic Byrd]

yes it is from the sample he gave me.

[Casey Scott]

Let me know how you like it Mic... Have plenty more where that came from.

[Mic Byrd]

Tested speeder and it was very good the changes worked out just right . I started the tires at .690 and that's height for a race the car was just a little tipy. Ran around 250 laps and only got .010 tire wear at .680 the car is no longer tipy.
Have to get a fresh motor in it and do some hot lapping tomorrow night at the Club.
Casey the wire work fine.