.

.

Results 1 to 2 of 2

Thread: gear ratio help

  1. #1
    Join Date
    Nov 2012
    Location
    12 miles south of P.A.'s
    Posts
    83

    gear ratio help

    Local track is putting in a drag strip, trying to help by being one of the first to build a car.

    Have a model car to use and bought a JDS Gasser chassis. JDS chassis is very nice with great instructions

    Track is suppose to be 1/4 mile

    We plan on running a simple break out series

    Have a 16D to use

    Measured the tires in the model and I'm using a rear that's going to be about 1.125 to 1.150 by .500 wide

    What gear ratio should I use

    for full 1/4 mile

    1000'

    1/8 mile

    Can I run a rear tire that's only .435 wide?

    Thanks Everyone

    George

  2. #2
    Join Date
    Apr 2005
    Location
    North East. PA
    Posts
    489
    I run the same gearing on all 3 lengths, personal choice. I also use the Pro Slot roll out gearing calculator for my gearing choices. Bigger the pinion size the softer the launch off the line. I have steered away from the 64 pitch gears and started using 48 pitch. I am getting a much smoother and easier to set gear mesh. I use 9 and 10 tooth pinions with that size tire for 16ds.
    Member of the original Fast Eddy Race Team

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •