2020 USRA Div 1 National Championships
OMB - One Motor Box 12
Wed Sept 23, 2020
OMB Race Results & Photos, posted below...
courtesy of Chicagoland Raceway, Mike Swiss, Al Chuck, Bernie Schatz...
(other photo credits as noted)
2020 USRA Div 1 National Championships
OMB - One Motor Box 12
Wed Sept 23, 2020
OMB Race Results & Photos, posted below...
courtesy of Chicagoland Raceway, Mike Swiss, Al Chuck, Bernie Schatz...
(other photo credits as noted)
Last edited by oldweirdherald; 09-24-2020 at 10:42 AM.
- - - - - - - - - - - - - - - - - - -
Paul Kassens
OWH Slot Car Talk "Mom"
The Old Weird Herald
email: paulk@oldweirdherald.com
- - - - - - - - - - - - - - - - - - -
OMB - One Motor Box 12
Wed Sept 23, 2020
OMB Race Results & Photos,
courtesy of Chicagoland Raceway, Mike Swiss, Al Chuck, Bernie Schatz
(other photo credits as noted)
11 entries for OMB
OMB Tech
OMB Field
Jason Holmes TQ’s OMB with a time of 2.490.
One Motor Box Results:
1) Justin Kill
2) Bernie Schatz
3) Jim Repati
Geary Gaspord was DQ'ed for having a car with weight added too far back in the chassis.
OMB Results
x
Last edited by oldweirdherald; 09-24-2020 at 10:39 AM.
- - - - - - - - - - - - - - - - - - -
Paul Kassens
OWH Slot Car Talk "Mom"
The Old Weird Herald
email: paulk@oldweirdherald.com
- - - - - - - - - - - - - - - - - - -
OMB Video
x
- - - - - - - - - - - - - - - - - - -
Paul Kassens
OWH Slot Car Talk "Mom"
The Old Weird Herald
email: paulk@oldweirdherald.com
- - - - - - - - - - - - - - - - - - -
I don't understand Geary Gaspord's DQ, where in OMB rules is it about added weights?
Its in the Group 12 General rules
One Motor Group 12 (OMB)
All General Rules also apply. .
this is the general rules on weights
3. Brass and lead may be used for weight.
a) Weights must be solid, rigidly attached, and not
used as a brace. All weight may only be
attached to the front and/or to any existing
weights. Weight may not be soldered to the
center rail or to the side rails.
b) Weights may extend no more than one (1) inch
(25.3 mm) back from the center of the guide hole.
c) No modifying or bracing of chassis will be considered to be legal
weight.
d) Weights may be soldered to the bottom of the
chassis if the chassis and attached weight clear
the track by 1/16 inch (13.05 mm) at all times
"Never underestimate the predictability of stupidity"
Archie King
2019 TSRA Series Group 7 Champion
2018 TSRA Series Group 7 Champion
2018 HillBilly Box World Record Holder 1.907
2016 HillBilly BoxStock Champion
2014 TSRA Series Group 7 Champion
Team KOFORD
http://www.koford.com/slot/
Bookmarks