.

.

Results 1 to 7 of 7

Thread: looking for a spur gear --80 pitch

  1. #1
    Join Date
    Oct 2004
    Location
    Ventura ,ca 93001
    Posts
    267

    looking for a spur gear --80 pitch

    Hello all...

    Was curious if anyone can help me find out if there are any 80 pitch 48 tooth 3/32" axle gears anywhere that can be bought???

    I know slick 7 used to make them and the part number was s7-442-48
    and
    voki did advertise them at one time, but can't find any venders or anyone online that might have them...


    Any help would be awesome..

    Thank you
    "MAY THE FORCE BE IN THE FINGER"
    "Theres no banks in heaven,spend it all on slotcars"
    "WINGS ARE FOR FAIRIES- GTP RACING RULES"

  2. #2
    Join Date
    Mar 2005
    Posts
    568
    In today's world tires are to short to run that large of gear. In ES classes the gear can't hang below the chassis. Many chassis run .650 and smaller tires when they wear.
    You could try a smaller pinion (5T 1.2mm shaft) if you are looking for a ratio.
    Maybe there is some NOS gears out there somewhere to help with your project.
    Why do I do this to myself?

  3. #3
    Join Date
    Apr 2012
    Posts
    168
    NCP hobbies might have this one still.. it is 46 Tooth however...

    https://www.ncphobbies.com/slick-7-1...rs/s7-442-46t/
    Slick 7 - Hybrid Gears 80 Pitch 46T 3/32 Axle (Slot Cars)
    Price: $4.98
    Product ID : S7-442-46t
    CK DaBoer

    Knocked you out of the slot!

  4. #4
    Join Date
    Apr 2012
    Posts
    168
    Also checked Eagle, They list these are available:

    47T Spur 80P

    Item #: S13047
    IN STOCK
    MSRP: $5.49

    49T Spur 80P

    Item #: S13049
    IN STOCK
    MSRP: $5.49

    Nothing at 48 tooth

    Ho[pe that helps
    CK DaBoer

    Knocked you out of the slot!

  5. #5
    Join Date
    Feb 2005
    Location
    Chesapeake, Va.
    Posts
    808
    I forgot all about this request. I'll check and see what I have. I know I have several in the 50s. Is metal OK?
    I've done so much with so little for so long it seems like I can do anything with nothing at all.

  6. #6
    Join Date
    Oct 2004
    Location
    Ventura ,ca 93001
    Posts
    267
    Thank you all....


    Ya I have the 47 and 49 tooth from JK. I was hoping someone still had the 48 tooth out there somewhere... I used them in 2006 ISRA worlds and have only one left from then.... I was hoping to find more 48 tooth because when you match it up
    with a 8 tooth 80 pitch... You get the same ratio as 7-42 but smoother feeling car...


    O well....



    Thank you again all who responded....
    "MAY THE FORCE BE IN THE FINGER"
    "Theres no banks in heaven,spend it all on slotcars"
    "WINGS ARE FOR FAIRIES- GTP RACING RULES"

  7. #7
    Join Date
    Oct 2004
    Location
    Ventura ,ca 93001
    Posts
    267
    Quote Originally Posted by Fast Freddie View Post
    I forgot all about this request. I'll check and see what I have. I know I have several in the 50s. Is metal OK?
    Was hoping just for plastic spurs..... Sonic I know still makes the 48-50 tooth metal....

    Anyways...

    Thank you again...


    I was hoping that someone still had # s7-442-48 part number out there somewhere.....
    "MAY THE FORCE BE IN THE FINGER"
    "Theres no banks in heaven,spend it all on slotcars"
    "WINGS ARE FOR FAIRIES- GTP RACING RULES"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •