.

.

Results 1 to 3 of 3

Thread: ECFS Flexi Cup 2021 November 20th - 21st

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2012
    Location
    Annapolis MD
    Posts
    105

    ECFS Flexi Cup 2021 November 20th - 21st

    The ECFS will hold its first annual Flexi Cup 2021 @ Fast Tracks in Bally , Pennsylvania from November 20th to November 21st. The racer who has the best overall finish in each class will be awarded the 2021 Flexi cup along with their name engraved on the Fast Tracks wall plaque as the 2021 Flexi cup champion.


    Raceway

    Fast Tracks Bally
    Owner - Chris Gambler
    Address - 20 Front Street , Bally , Pennsylvania 19503
    Tracks - Hillclimb & Kingleman

    Saturday November 20th

    Handout E- Production - Hillclimb - $35 entry fee includes 2 Eagle handout motors
    LMP- FK - Hillclimb - 20$ entry fee
    10$ pit pass

    Sunday November 21st

    GTP - Kingleman- 20$ entry fee
    10$ pit pass




    2021 Flexi Cup Rules



    East Coast Production

    Chassis - Must be a stamped steel chassis. No aluminum pans allowed. Chassis must not be altered from its original design. You may interchange pans as long as they are of the same manufacturer. You may jig/grind the rear axle holes for clearance. Bite bar diameters may be changed but must not be switched between manufacturers. 3/32nd axles only. No hollow axles. Oilites only .No ball bearings allowed. Bracing is allowed such as motor box bracing , chassis uprights and guide tongues. Floating or non floating pin tubes are allowed. Tape and lexan is allowed. Max width will be 83mm 047 clearance

    Motor - Handout Mid America Eagle only. No modifications except you may notch the can for axle clearance

    Body - Mid America Peugeot Part # MID971 only ( 005 , 007 , or 010 )

    Must have 3 numbers located anywhere on the body. Must have clear windows and be painted opaque. Front wheel stickers must be present. Body should be cut on the cut line for the front bumper and the rear bumper must retain an 1/8 of an inch Must have a 3D molded painted Interior. Interior must cover any visible chassis. No added aero allowed such as wings , diaplanes etc. Tape , lexan and mylar is allowed. No rear height rule. ECFS reserves the right to reject any body that does not conform to our standards.

    Gears - 64 pitch only . Gears may not hang below the chassis.

    Tire - Open tire rule. No speed rubber no minimum size

    LMP-FK

    Chassis - Must be a stamped steel chassis. Aluminum pans are allowed. Chassis must not be altered from its original design. You may interchange pans as long as they are of the same manufacturer. You may jig/grind the rear axle holes for clearance. Bite bar diameters may be changed but must not be switched between manufacturers. 3/32nd axles only. No hollow axles. Oilites only .No ball bearings allowed. Bracing is allowed such as motor box bracing , chassis uprights and guide tongues. Floating or non floating pin tubes are allowed. Tape and lexan is allowed. Max width will be 83mm 047 clearance

    Motor - Sealed or unsealed Proslot 4002FK motor only. Can must not be altered. Chinese 4002FK armature only. You may tie , epoxy and balance the armature. Comm may be cut as well. Stock 4002FK magnets only. You may NOT hone the magnets. Oilites in the can and endbell only. You may glue and solder in the oilites. You may change the brushes and springs. Hardware must be the Proslot stock or copper version. Arm shafts must not be cut.

    Body - Ralph Thorne Orca only 005 , 007 and 010

    Must have a 3D interior. Must be painted opaque and have 3 numbers. Must have front wheel stickers present. Any windows on the body must be clear. Rear of the body may be cut out. There is no rear end height rule. Body must be cut on cut line and must retain a vertical lip on front bumper. No diaplanes allowed No added aero allowed 005 , 007 and 010 thickness allowed. The ECFS reserves the right to reject any bodies that do not conform to our rules.

    Gears - Any gears. Gears may not hang below chassis.

    Tire - open tire rule. No speed rubber no minimum

    GTP

    Chassis - Must be a stamped steel chassis. Aluminum pans are allowed. Chassis must not be altered from its original design. You may interchange pans as long as they are of the same manufacturer. You may jig/grind the rear axle holes for clearance. Bite bar diameters may be changed but must not be switched between manufacturers. 3/32nd axles only. No hollow axles. Oilites only .No ball bearings allowed. Bracing is allowed such as motor box bracing , chassis uprights and guide tongues. Floating or non floating pin tubes are allowed. Tape and lexan is allowed. Max width will be 83mm 047 clearance

    Motor - Pheonix motor Only . No Ball bearing versions allowed . You may notch the can for clearance

    Body - Must be one of these bodies listed below

    Ralph Thorne Racing
    Viking
    Warrior

    Outisight
    Bentlee OS-363 & OS-369

    Mid America
    Evolution
    Audi R-18

    Must have a 3D interior. Must be painted opaque and have 3 numbers. Must have front wheel stickers present. Any windows on the body must be clear. Rear of the body may be cut out. There is no rear end height rule. Body must be cut on cut line and must retain a vertical lip on front bumper. No diaplanes allowed No added aero allowed 005 , 007 and 010 thickness allowed. The ECFS reserves the right to reject any bodies that do not conform to our rules.

    Gears - Any gears . Gears may not hang below chassis

    Tire - open tire rule. No speed rubber no minimum
    Last edited by G1Good; 06-14-2021 at 04:46 AM.
    East Coast Flexi Series
    https://m.facebook.com/ECFSlot/

  2. #2
    Join Date
    Dec 2012
    Location
    Annapolis MD
    Posts
    105
    Changes have been made to GTP please notice we have dropped the red Fox star fighter and have replaced it with the Mid America Evolution GTP body part # MAR953. We will also NOT be using 047 clearance. We will be using 032 . If you have any questions please feel free to message me here or on facebooks ECFS page.
    Last edited by G1Good; 04-20-2021 at 07:38 AM.
    East Coast Flexi Series
    https://m.facebook.com/ECFSlot/

  3. #3
    Join Date
    Dec 2012
    Location
    Annapolis MD
    Posts
    105
    Race has been cancelled
    East Coast Flexi Series
    https://m.facebook.com/ECFSlot/

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •