.

.

Page 1 of 4 1234 LastLast
Results 1 to 15 of 49

Thread: 2003 American Flat Track Worlds

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2002
    Posts
    332

    2003 American Flat Track Worlds

    On June 27, 28 and 29th the 2nd annual American Flat Track Worlds will be held at South Hill Slots in Puyallup, Washington. Come test your skills on one of America's finest short flat tracks, the 105 foot Canadian White. Ten classes of scale cars will be contested with a class for everyone.

    Amateur LMP $10.00
    Pro LMP $15.00
    Group 12 Indy $15.00
    Amateur Group 10 $10.00
    Pro Group 10 $15.00
    Group 12 $15.00
    GT 12 $15.00
    C 1 $20.00
    1/32 Eurosport $20.00
    1/24th Eurosport $30.00

    An American Flat Track Worlds Grand Champion will be crowned by being the top points getter in four classes: Pro Group10, Group 12, GT 12 and 1/24th Eurosport.

    105 Foot Custom Build Track, Epoxy Surface, 12 Volt Clean, Consistent Power.

    FREE TRACK TIME FOR ALL RACERS

    1/24TH EUROSPORT CASH PAYOUT

    1st $300.00
    2nd $200.00
    3rd $100.00

    Plaques for all Classes and Concours. Merchandise payout for all Classes except 1/24th Eurosport.

    FREE BARBEQUE FOR ALL RACERS ON SUNDAY

    For more information contact Lee Gilbert 425 432 0213 [email protected]
    Kirk Livernash 253 845 1204 [email protected]

    South Hill Slots
    12623 67th Ave. E.
    Puyallup. WA 98373

    BE THERE OR BE SQUARE
    Last edited by Speedshop; 05-19-2003 at 10:29 PM.

  2. #2
    Join Date
    Jun 2002
    Location
    Langley BC, Canada
    Posts
    153
    Ok i give! I'd rather not be too square so i'll be there. Matter of fact i think i'll start painting tonight! Now if i could just figure out how to go faster on red lane!!
    Hey Mike K - are you coming this year? Hope to see ya there.
    OR2

  3. #3
    Join Date
    May 2002
    Location
    so cal
    Posts
    535

    maybe . . .

    I have the date on my calendar! Not sure yet. Only been racing 4 1/2 nascars on the super fast king at Buena Park lately. . . the Canadian White will surely be a challenge after racing on the banked king!

  4. #4
    Join Date
    Jun 2002
    Location
    NorthWesterner now in Philippines
    Posts
    9,751

    Be there or be square...

    Hey Lee...

    In the case of many potential racers.... do you think that it would be ok to be there AND be square????
    - - - - - - - - - - - - - - - - - - -
    Paul Kassens
    OWH Slot Car Talk "Mom"
    The Old Weird Herald
    email: [email protected]

    - - - - - - - - - - - - - - - - - - -

  5. #5
    Join Date
    Jun 2002
    Location
    Wellington, New Zealand
    Posts
    4,540

    Thumbs up E=MC2

    In my book, just being there will be reward enough
    Last edited by Zippity; 05-23-2003 at 02:50 PM.

  6. #6
    Join Date
    Apr 2003
    Posts
    42
    Speedshop

    Is it possible to have the rules for this race event? And pictures of the track?

    Are you allowed to change the motor at each heat for the Eurosport and GT12 race?

    K.

  7. #7
    Join Date
    May 2002
    Posts
    274

  8. #8
    Join Date
    May 2002
    Location
    City of Chicago
    Posts
    632

    Motor changes

    Originally posted by kimbo
    Are you allowed to change the motor at each heat for the Eurosport and GT12 race?
    You can change motors as often as you want but since cars can only be worked on while the power is on you better be able to change motors REALLY, REALLY quickly.

    But seriously, with only 12v, it is highly unlikely you will wear out a motor during the race. You could probably use the same motor for LMP and Group10 no worries.

  9. #9
    Join Date
    Jun 2002
    Location
    Robertsdale, Alabama / S.C.C.S.A.
    Posts
    524

    After Five Straight Years..............

    I regret to say that I will not be able to attend the best race of the year in 2003.

    I could make excuses but the truth is I am afraid of getting beaten by Lee's daughter Alicia.

    Maybe next year.

    Have fun you guys!

    I truly will miss the Slugfest this year. It will feel weird not to be there.

    Greg G.
    How Sweet It Is!!!!!

  10. #10
    Join Date
    Jun 2002
    Location
    fairfield ca.
    Posts
    339

    any takers ?

    i got five bucks that says greg will be there ready to race now that gawronski is rumured to be gearing up for slugfest with his new sidekick.......

    just to stir the simerin #@$%!

  11. #11
    Join Date
    Jun 2002
    Location
    Robertsdale, Alabama / S.C.C.S.A.
    Posts
    524

    Anything is possible........

    Like Alicia being the first girl to beat Gawronski.

    Greg
    How Sweet It Is!!!!!

  12. #12
    Join Date
    Jun 2002
    Location
    Concord,CA.
    Posts
    44

    The Flats

    Hi all,

    I will be coming up for the first Time.
    I am from Concord Ca.I usually race at
    Eddies Slotcar World and in the norcal area.
    I am looking forward to a great time.Herman
    James has said it is a ball.I missed Paul
    at the Chico enduro this year.See ya there!!!!

    SCN

  13. #13
    Join Date
    Jun 2002
    Location
    Robertsdale, Alabama / S.C.C.S.A.
    Posts
    524

    OK Herman...

    I have to admit that I got all happy and all last night at UK's when I ran my Euro on the Korkscrew.

    That was the first time I drove that car since Miserable Ridge.

    I felt myself smile when the lap counter flashed 2.952 and now I REALLY know I will miss being there. Euros rule.

    The raceway is moving into larger digs so the next couple of months are going to be pretty hectic for ol Greg.

    Greg
    How Sweet It Is!!!!!

  14. #14
    Join Date
    Jun 2002
    Posts
    332

    American Flat Track Worlds Bodies

    The BPA 1/24th BMW will be allowed along with the BPA 1/32nd Reynard for the AFTSs. These bodies are imported by Ron Hershman but have been hard to get. The track, South Hill Slots, will have them available in aprox. a week or a little more.

    The 1 2/4 BMW is only good for Eurosport. This body does not have enough wing on it for the Production based classes. For most classes the 0/S Bentlee #066 is the body of choice.

  15. #15
    Join Date
    Jun 2002
    Location
    Langley BC, Canada
    Posts
    153
    Lee - i think you quoted the wrong part # for the Bentlee. I think it's the 068 not the 066.
    The Bentlee is a great choice but the Mercedes is very good too.
    24 days and counting!!
    OR2

Page 1 of 4 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •